PP Homo-Polymer

Polypropylene Homopolymer (PPH) is the more widely utilized than co-polymer and also offers a higher strength to weight ratio and is stiffer and stronger. This combined with good chemical resistance and weldability allows this material to be used in many corrosion resistant structures.

Compared to low or high density polyethylene, it has a lower impact strength, but superior working temperature and tensile strength. Noted for its excellent chemical resistance in corrosive environments, polypropylene provides excellent resistance to organic solvents, degreasing agents and electrolytic attack. It is light in weight, resistant to staining, and has a low moisture absorption rate.

Braskem

PRODUCT	MFR	DENS / PROCESS	FILE
PP 070G2M	12 (230 °C/ 2.16 kg)	0.950
PP 080G2M	45 (230 °C/2.16 kg	0.955
GE7100	0.8 (230°C / 2.16kg)	0.905 / Inj & Blow/ Ext
H301	10 (230°C / 2.16kg)	0.905 / Injection
D115A	11 (230°C / 2.16kg)	– / –
H502N	11 (230°C / 2.16kg)	0.905 / Injection
H306	15 (230°C / 2.16kg)	0.905 / Fibre Extr
H605	2.1 (230°C / 2.16kg)	0.905 / Ext & Thermo
H611	2.1 (230°C / 2.16kg)	0.905 / Raffia Ext
H502H	2.2 (230°C / 2.16kg)	0.905 / Blow/ Thermo/ Extr
H203	20 (230°C / 2.16kg)	0.905 / Injection
H214	26 (230°C / 2.16kg)	0.905 / Fibre Extr
H214	26 (230°C / 2.16kg)	0.905 / Fibre Extr
H504XP	3 (230°C / 2.16kg)	0.905 / Bio-Films
H502HC	3.3 (230°C / 2.16kg)	0.905 / Injection/ Thermo
H501HC	3.5 (230°C / 2.16kg)	0.905 / Bio-Fllms / Thermo
H503	3.5 (230°C / 2.16kg)	0.905 / Cast Film
H550K	3.5 (230°C / 2.16kg)	0.905 / Raffia & FD Extr
H503HS	4 (230°C / 2.16kg)	0.905 / Fibre & Raffia Extr
H103	40 (230°C / 2.16kg)	0.905 / Injection
H105	40 (230°C / 2.16kg)	0.905 / Injection
PH3515	44 (230°C / 2.16kg)	0.905 / Injection
H117	45 (230°C / 2.16kg)	0.905 / Injection
BH50	50 (230°C / 2.16kg)	0.900 / HS Injection
H515M	8 (230°C / 2.16kg)	0.905 / Cast Film
H107	80 (230°C / 2.16kg)	0.905 / Injection
HP405U	80 (230°C / 2.16kg)	0.905 / Injection